Novell NETWARE 6-DOCUMENTATION Manual page 1381

1
Select and upgrade/install some servers to serve as Migration Agents in
the network section to be migrated.
2
Upgrade/Install all servers in the network section using the IP and IPX
option.
3
Upgrade/Install all clients in the network section using the IP only option.
4
Modify the configuration of the servers in the network section to be IP
only.
5
Turn off IPX networking between the selected section of the network and
the rest of the network.
The following figure shows how the steps above are applied in a sample
network.
Figure 9 Migrating a Section of the Network
WAN
link
Router
Client A
1
Upgrade Server A to NetWare 6 as a Migration Agent.
2
Upgrade Server B to NetWare 6 using the IP and IPX install option.
3
Upgrade Server B to NetWare 6 using the IP and IPX install option.
4
Unbind IPX from the network adapters in server B and load scmd.nlm.
Unbind IPX from the network adapters in server A and reload scmd.nlm
without the Migration Agent option.
5
Turn off IPX routing at the router.
Server A
Client B Client C
Server B
Setting Up
43