Command Groups; Table 4-4 Command Groups - SMC Networks 8126PL2-F - annexe 1 Management Manual

4
Command Line Interface

Command Groups

The system commands can be broken down into the functional groups shown below
Command Group
General
System Management
Simple Network
Management Protocol
Authentication
General Security
Measures
Access Control List
Interface
Link Aggregation
Mirror Port
RSPAN Mirroring
Rate Limiting
PoE
Address Table
Spanning Tree
VLANs
Class of Service
Quality of Service
Multicast Filtering
Domain Name Service
IP Interface
4-10

Table 4-4 Command Groups

Description
Basic commands for entering privileged access mode, restarting the
system, or quitting the CLI
Display and setting of system information, basic modes of operation,
maximum frame size, file management, console port and telnet settings,
system logs, SMTP alerts, system clock, and switch clustering
Activates authentication failure traps; configures community access
strings, and trap managers
Configures user names and passwords, logon access using local or
remote authentication (including AAA), management access through
the web server, Telnet server and Secure Shell; as well as port security,
IEEE 802.1X port access control, and restricted access based on
specified IP addresses
Segregates traffic for clients attached to common data ports; and
prevents unauthorized access by configuring valid static or dynamic
addresses, MAC address authentication, and filtering DHCP requests
and replies
Provides filtering for IPv4 frames (based on address, protocol, TCP/
UDP port number, TCP control code, or non-IP frames (based on MAC
address or Ethernet type)
Configures the connection parameters for all Ethernet ports,
aggregated links, and VLANs
Statically groups multiple ports into a single logical trunk; configures
Link Aggregation Control Protocol for port trunks
Mirrors data to another port for analysis without affecting the data
passing through or the performance of the monitored port
Mirrors data from remote switches over a dedicated VLAN
Controls the maximum rate for traffic transmitted or received on a port
Configures power output for connected evices
Configures the address table for filtering specified addresses, displays
current entries, clears the table, or sets the aging time
Configures Spanning Tree settings for the switch
Configures VLAN settings, and defines port membership for VLAN
groups; also enables or configures private VLANs and protocol VLANs
Sets port priority for untagged frames, selects strict priority or weighted
round robin, relative weight for each priority queue, also sets priority for
TCP/UDP traffic types, and DSCP
Configures Differentiated Services
Configures IGMP multicast filtering, query parameters, specifies ports
attached to a multicast router, and enables multicast VLAN registration
Configures DNS services
Configures IP address for the switch
.
Page
4-11
4-16
4-61
4-76
4-123
4-143
4-155
4-167
4-178
4-180
4-185
4-186
4-186
4-196
4-215
4-244
4-257
4-266
4-290
4-297