Switch Power Status; Figure 3-82 Displaying The Global Poe Status - SMC Networks 8126PL2-F - annexe 1 Management Manual

power, if necessary by dropping power to ports set for a lower priority. If power is
dropped to some low-priority ports and later the power demands on the switch fall
back within its budget, the dropped power is automatically restored.

Switch Power Status

Displays the Power over Ethernet parameters for the switch.
Command Attributes
• Maximum Available Power – The configured power budget for the switch.
• System Operation Status – The PoE power service provided to the switch ports.
• Mainpower Consumption – The amount of power being consumed by PoE
devices connected to the switch.
• Thermal Temperature
• Software Version – The version of software running on the PoE controller
subsystem in the switch.
Web – Click PoE, Power Status.
CLI – This example displays the current power status for the switch.
Console#show power mainpower
Unit 1 Mainpower Status
Maximum Available Power : 375 watts
System Operation Status : on
Mainpower Consumption
Software Version
Console#
7. This parameter is not supported for the current hardware.
7
– The internal temperature of the switch.

Figure 3-82 Displaying the Global PoE Status

: 0 watts
: Version 3.4
Power Over Ethernet Settings
3
4-195
3-135