Command Groups - SMC Networks 6724AL2 Management Manual

C L
OMMAND INE
followed by the "?" character to display a list of possible matches. You can
also use the following editing keystrokes for command-line processing:
Keystroke
Ctrl-A
Ctrl-B
Ctrl-E
Ctrl-F
Ctrl-P
Ctrl-U
Ctrl-W
Delete key or backspace key Erases a mistake when entering a command.

Command Groups

The system commands can be broken down into the functional groups
shown below
Command
Group
General
Flash/File
System
Management
SNTP
SNMP
IP Interface
3-10
I
NTERFACE
.
Description
Basic commands for entering privileged access
mode, restarting the system, or quitting the CLI
Manages code image or switch configuration files
Controls system logs, system passwords, user name,
browser management options, and a variety of other
system information
Configures SNTP client settings
Activates authentication failure traps; configures
community access strings, and trap managers
Configures the IP address and gateway for
management access, DHCP server and relay service
for server blades, displays the default gateway, or
pings a specified device
Function
Shifts cursor to start of command line.
Shifts cursor to the left one character.
Shifts cursor to end of command line.
Shifts cursor to the right one character.
Shows the last command.
Deletes the entire line.
Deletes the last word typed.
Page
3-12
3-19
3-26
3-54
3-61
3-68