SMC Networks 8126PL2-F - annexe 1 Management Manual page 133

CLI – This example sets the 802.1X parameters on port 2. For a description of the
additional fields displayed in this example, see "show dot1x" on page 4-118.
Console(config)#interface ethernet 1/2
Console(config-if)#dot1x port-control auto
Console(config-if)#dot1x re-authentication
Console(config-if)#dot1x max-req 5
Console(config-if)#dot1x timeout quiet-period 30
Console(config-if)#dot1x timeout re-authperiod 1800
Console(config-if)#dot1x timeout tx-period 40
Console(config-if)#exit
Console(config)#exit
Console#show dot1x
Global 802.1X Parameters
System-auth-control: Enabled
802.1X Port Summary
Port Type
--------- ------------- -------------- ------------------ ----------
Eth 1/ 1 Disabled
Eth 1/ 2 Authenticator Single-Host
. .
.
Eth 1/26 Disabled
802.1X Port Details
802.1X is disabled on port 1/1
Authenticator Information:
Reauthentication
Reauth Period
Quiet Period
TX Period
Supplicant Timeout
Server Timeout
Reauth Max Retries
Max Request
Operation Mode
Port Control
Supplicant
Authenticator PAE State Machine
State
Reauth Count
Current Identifier
Backend State Machine
State
Request Count
Identifier (Server) :0
Reauthentication State Machine
State
State
. .
.
802.1X is disabled on port 1/26
Console#
Operation Mode Port Control
Single-Host
Single-Host
: Enabled
: 1800 seconds
: 30 seconds
: 40 seconds
: 30 seconds
: 10 seconds
: 2
: 5
: Single-Host
: Auto
: 00-00-00-00-00-00
: Initialize
: 0
: 0
:Initialize
:0
:Initialize
Initialize
User Authentication
ForceAuthorized
Auto
ForceAuthorized
3
4-155
4-113
4-115
4-113
4-116
4-116
4-117
4-118
Authorized
Yes
No
No
3-85