Command Groups; Table 4-4 Command Group Index - SMC Networks 8708L2 - annexe 1 Management Manual

C L
OMMAND INE
Keystroke
Esc-D
Esc-F
Delete key or
backspace key

Command Groups

The system commands can be broken down into the functional groups
shown below
Command Group Description
Line
General
System
Management
Flash/File
Authentication
Access Control
List
SNMP
Interface
4-12
I
NTERFACE
Table 4-3 Keystroke Commands (Continued)
Function
Deletes from the cursor to the end of the word.
Moves the cursor forward one word.
Erases a mistake when entering a command.
.

Table 4-4 Command Group Index

Sets communication parameters for the serial port
and Telnet, including baud rate and console time-out
Basic commands for entering privileged access mode,
restarting the system, or quitting the CLI
Controls system logs, system passwords, user name,
browser management options, and a variety of other
system information
Manages code image or switch configuration files
Configures logon access using local or remote
authentication; also configures port security and
IEEE 802.1X port access control
Provides filtering for IP frames (based on address,
protocol, TCP/UDP port number or TCP control
code) or non-IP frames (based on MAC address or
Ethernet type)
Activates authentication failure traps; configures
community access strings, and trap managers
Configures the connection parameters for all
Ethernet ports, aggregated links, and VLANs
Page
4-14
4-26
4-33
4-86
4-94
4-117
4-150
4-169