Web Server Commands; Ip Http Port; Table 4-32 Web Server Commands - SMC Networks 8126PL2-F - annexe 1 Management Manual

Command Mode
Privileged Exec
Example
Console#show accounting
Accounting type: dot1x
Method list: default
Group list: radius
Interface:
Method list: tps
Group list: radius
Interface: eth 1/2
Accounting type: Exec
Method list: default
Group list: radius
Interface: vty
Console#

Web Server Commands

This section describes commands used to configure web browser management
access to the switch.
Command

ip http port

ip http server
ip http secure-server
ip http secure-port
ip http port
This command specifies the TCP port number used by the web browser interface.
Use the no form to use the default port.
Syntax
ip http port port-number
no ip http port
port-number - The TCP port to be used by the browser interface.
(Range: 1-65535)
Default Setting
80
Command Mode
Global Configuration

Table 4-32 Web Server Commands

Function
Specifies the port to be used by the web browser interface
Allows the switch to be monitored or configured from a browser GC
Enables HTTPS for encrypted communications
Specifies the UDP port number for HTTPS
Authentication Commands
Mode
GC
GC
GC
4
Page
4-99
4-100
4-100
4-101
4-99