Tacacs-Server Timeout; Show Tacacs-Server - SMC Networks 8126PL2-F - annexe 1 Management Manual

tacacs-server timeout

This command sets the interval between transmitting authentication requests to the
TACACS+ server. Use the no form to restore the default.
Syntax
tacacs-server timeout number_of_seconds
no tacacs-server timeout
number_of_seconds - Number of seconds the switch waits for a reply
before resending a request. (Range: 1-540)
Default Setting
5 seconds
Command Mode
Global Configuration
Example
Console(config)#tacacs-server timeout 10
Console(config)#

show tacacs-server

This command displays the current settings for the TACACS+ server.
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show tacacs-server
Remote TACACS+ server configuration:
Global Settings:
Communication Key with TACACS+ Server:
Server Port Number:
Retransmit Times
Request Times
Server 1:
Server IP address:
Communication key with TACACS+ server:
Server port number:
Retransmit Times
Request Times
Tacacs server group:
Group Name
---------------------
tacacs+
Console#
:
:
:
:
Member Index
-------------
Authentication Commands
49
2
5
1.2.3.4
49
2
5
1
4
4-89