Authorization Settings - SMC Networks 8126PL2-F - annexe 1 Management Manual

3
Configuring the Switch
CLI – Use the following command to display the currently applied accounting
methods, and registered users.
Console#show accounting
Accounting Type : dot1x
Method List
Group List
Interface
Method List
Group List
Interface
Accounting Type : Exec
Method List
Group List
Interface
Accounting Type : Commands 0
Method List
Group List
Interface
Console#show accounting statistics
Total entries: 3
Acconting type : dot1x
Username
Interface
Time elapsed since connected: 00:24:44
Acconting type : exec
Username
Interface
Time elapsed since connected: 00:25:09
Console#

Authorization Settings

AAA authorization is a feature that verifies a user has access to specific services.
Command Attributes
• Method Name – Specifies an authorization method for service requests.
The "default" method is used for a requested service if no other methods have been
defined. (Range: 1-255 characters)
• Service Request – Specifies the service as Exec (authorization for local console
or Telnet connections).
• Group Name - Specifies the authorization server group.
(Range: 1-255 characters)
The group name "tacacs+" specifies all configured TACACS+ hosts (see
"Configuring Local/Remote Logon Authentication" on page 3-56). Any other group
name refers to a server group configured on the TACACS+ Group Settings page.
Authorization is only supported for TACACS+ servers.
3-70
: default
: radius
:
: tps-method
: tps-radius
:
: default
: tacacs+
:
: default
: tacacs+
:
: testpc
: eth 1/1
: admin
: vty 0
4-98