Dhcp Snooping Binding Information; Figure 3-65 Dhcp Snooping Port Configuration - SMC Networks 8126PL2-F - annexe 1 Management Manual

3
Configuring the Switch
Web – Click DHCP Snooping, Port Configuration. Set any ports within the local
network or firewall to trusted, and click Apply.
CLI – This example shows how to enable the DHCP Snooping Trust Status for ports
Console(config)#interface ethernet 1/5
Console(config-if)#ip dhcp snooping trust
Console#show ip dhcp snooping
Global DHCP Snooping status: disable
DHCP Snooping Information Option Status: disable
DHCP Snooping Information Policy: replace
DHCP Snooping is configured on the following VLANs:
Verify Source Mac-Address: enable
Interface
----------
Eth 1/1
Eth 1/2
Eth 1/3
Eth 1/4
Eth 1/5
. .
.

DHCP Snooping Binding Information

Binding table entries can be displayed on the Binding Information page.
Command Attributes
• No. – Entry number for DHCP snooping binding information.
• Unit – Stack unit.
• Port – Port number.
• VLAN ID – VLAN for which DHCP snooping has been enabled.
• MAC Address – Physical address associated with the entry.
• IP Address – IP address corresponding to the client.
3-106

Figure 3-65 DHCP Snooping Port Configuration

Trusted
----------
No
No
No
No
Yes
.
4-134
4-138