Rcommand; Show Cluster - SMC Networks 8126PL2-F - annexe 1 Management Manual

Command Usage
• The maximum number of cluster Members is 16.
The maximum number of switch Candidates is 100
•
Example
Console(config)#cluster member mac-address 00-12-34-56-78-9a id 5
Console(config)#

rcommand

This command provides access to a cluster Member CLI for configuration.
Syntax
rcommand id <member-id>
member-id - The ID number of the Member switch. (Range: 1-16)
Command Mode
Privileged Exec
Command Usage
• This command only operates through a Telnet connection to the Commander
switch. Managing cluster Members using the local console CLI on the
Commander is not supported.
There is no need to enter the username and password for access to the
•
Member switch CLI
Example
Console#rcommand id 1
CLI session with the SMC8126PL2-F is opened.
To end the CLI session, enter [Exit].
Console#

show cluster

This command shows the switch clustering configuration.
Command Mode
Privileged Exec
Example
Console#show cluster
Role:
Interval heartbeat:
Heartbeat loss count: 3
Number of Members:
Number of Candidates: 2
Console#
.
commander
30
1
System Management Commands
.
4
4-59