System Defaults; Table 1-2 System Defaults - SMC Networks 8126PL2-F - annexe 1 Management Manual

1
Introduction

System Defaults

The switch's system defaults are provided in the configuration file
"Factory_Default_Config.cfg." To reset the switch defaults, this file should be set as
the startup configuration file (page 3-22).
The following table lists some of the basic system defaults.
Function
Console Port
Connection
Authentication
Web Management
1-6

Table 1-2 System Defaults

Parameter
Baud Rate
Data bits
Stop bits
Parity
Local Console Timeout
Privileged Exec Level
Normal Exec Level
Enable Privileged Exec from Normal
Exec Level
RADIUS Authentication
TACACS Authentication
802.1X Port Authentication
MAC Authentication
HTTPS
SSH
Port Security
IP Filtering
DHCP Snooping
IP Source Guard
HTTP Server
HTTP Port Number
HTTP Secure Server
HTTP Secure Port Number
Default
auto
8
1
none
0 (disabled)
Username "admin", Password "admin"
Username "guest", Password "guest"
Password "super"
Disabled
Disabled
Disabled
Disabled
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled (all ports)
Enabled
80
Enabled
443