SMC Networks 8126PL2-F - annexe 1 Management Manual page 180

10/100/1000 l2-lite smb poe gigabit switch
Hide thumbs Also See for 8126PL2-F - annexe 1:
Table of Contents

Advertisement

3
Configuring the Switch
Parameter
Multiple Collision Frames
Carrier Sense Errors
SQE Test Errors
Frames Too Long
Deferred Transmissions
Internal MAC Receive Errors
RMON Statistics
Drop Events
Jabbers
Received Bytes
Collisions
Received Frames
Broadcast Frames
Multicast Frames
CRC/Alignment Errors
Undersize Frames
Oversize Frames
Fragments
3-132
Table 3-11 Port Statistics (Continued)
Description
A count of successfully transmitted frames for which transmission is
inhibited by more than one collision.
The number of times that the carrier sense condition was lost or never
asserted when attempting to transmit a frame.
A count of times that the SQE TEST ERROR message is generated by the
PLS sublayer for a particular interface.
A count of frames received on a particular interface that exceed the
maximum permitted frame size.
A count of frames for which the first transmission attempt on a particular
interface is delayed because the medium was busy.
A count of frames for which reception on a particular interface fails due to
an internal MAC sublayer receive error.
The total number of events in which packets were dropped due to lack of
resources.
The total number of frames received that were longer than 1518 octets
(excluding framing bits, but including FCS octets), and had either an FCS
or alignment error.
Total number of bytes of data received on the network. This statistic can
be used as a reasonable indication of Ethernet utilization.
The best estimate of the total number of collisions on this Ethernet
segment.
The total number of frames (bad, broadcast and multicast) received.
The total number of good frames received that were directed to the
broadcast address. Note that this does not include multicast packets.
The total number of good frames received that were directed to this
multicast address.
The number of CRC/alignment errors (FCS or alignment errors).
The total number of frames received that were less than 64 octets long
(excluding framing bits, but including FCS octets) and were otherwise well
formed.
The total number of frames received that were longer than 1518 octets
(excluding framing bits, but including FCS octets) and were otherwise well
formed.
The total number of frames received that were less than 64 octets in length
(excluding framing bits, but including FCS octets) and had either an FCS
or alignment error.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 8126PL2-F - annexe 1 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Tigerswitch smc8126pl2-f

Table of Contents