Show Interfaces Status - SMC Networks 8126PL2-F - annexe 1 Management Manual

show interfaces status

This command displays the status for an interface.
Syntax
show interfaces status [interface]
interface
• ethernet unit/port
- unit - Stack unit. (Range: 1)
- port - Port number. (Range: 1-26/50)
• port-channel channel-id (Range: 1-32)
• vlan vlan-id (Range: 1-4094)
Default Setting
Shows the status for all interfaces.
Command Mode
Normal Exec, Privileged Exec
Command Usage
If no interface is specified, information on all interfaces is displayed. For a
description of the items displayed by this command, see "Displaying
Connection Status" on page 3-112.
Example
Console#show interfaces status ethernet 1/5
Information of Eth 1/5
Basic information:
Port Type:
Mac Address:
Configuration:
Port Admin:
Speed-duplex:
Capabilities:
Broadcast Storm:
Broadcast Storm Limit:
Multicast Storm:
Multicast Storm Limit:
Unknown Unicast Storm:
Unknown Unicast Storm Limit:
Flow Control:
LACP:
Port Security:
Max MAC Count:
Port Security Action:
Media Type:
Current status:
Link Status:
Port Operation Status:
Operation Speed-duplex:
Flow Control Type:
1000T
00-13-F7-12-31-28
Up
Auto
10half, 10full, 100half, 100full, 1000full
Enabled
500 packets/second
Disabled
262143 packets/second
Disabled
262143 packets/second
Disabled
Disabled
Disabled
0
None
None
Up
Up
100full
None
Interface Commands
4-163
4