Figure 3-54 Creating An Ip Filter List - SMC Networks 8126PL2-F - annexe 1 Management Manual

3
Configuring the Switch
Web – Click Security, IP Filter. Enter the IP addresses or range of addresses that
are allowed management access to an interface, and click Add Web IP Filtering
Entry to update the filter list.
CLI – This example allows SNMP access for a specific client.
Console(config)#management snmp-client 10.1.2.3
Console(config)#end
Console#show management all-client
Management IP Filter
HTTP-Client:
Start IP address
-----------------------------------------------
SNMP-Client:
Start IP address
-----------------------------------------------
1. 10.1.2.3
TELNET-Client:
Start IP address
-----------------------------------------------
Console#
3-88

Figure 3-54 Creating an IP Filter List

End IP address
End IP address
10.1.2.3
End IP address
4-121