Mac-Address-Table Aging-Time; Show Mac-Address-Table Aging-Time - SMC Networks 8126PL2-F - annexe 1 Management Manual

means to match a bit and "1" means to ignore a bit. For example, a mask of
00-00-00-00-00-00 means an exact match, and a mask of
FF-FF-FF-FF-FF-FF means "any."
• The maximum number of address entries is 8191.
Example
Console#show mac-address-table
Interface Mac Address
--------- ----------------- ---- -----------------
Eth 1/1 00-12-cf-94-34-de
Trunk 2 00-12-cf-8f-aa-1b
Console#

mac-address-table aging-time

This command sets the aging time for entries in the address table. Use the no form
to restore the default aging time.
Syntax
mac-address-table aging-time seconds
no mac-address-table aging-time
seconds - Aging time. (Range: 10-30000 seconds; 0 to disable aging)
Default Setting
300 seconds
Command Mode
Global Configuration
Command Usage
The aging time is used to age out dynamically learned forwarding information.
Example
Console(config)#mac-address-table aging-time 100
Console(config)#

show mac-address-table aging-time

This command shows the aging time for entries in the address table.
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show mac-address-table aging-time
Aging time: 100 sec.
Console#
Power over Ethernet Commands
Vlan Type
1 Delete-on-reset
1 Learned
4
4-195