Site Survey Screen - ZyXEL Communications NBG4615 User Manual

Chapter 12 WISP Mode

12.5.3 Site Survey Screen

Use this screen to scan for and connect to a wireless network automatically. Go to Configuration >
Site Survey to open the following screen.
Figure 69 Configuration > Wireless LAN > Site Survey (WISP)
The following table describes the labels in this screen.
Table 42 Configuration > Wireless LAN > Site Survey (WISP)
LABEL
Station Site Survey
#
SSID
BSSID
Signal
Strength
Channel
station encryp
station auth
Network Type
Rescan
Setting
98
DESCRIPTION
Select a wireless device and click Add Profile to open a configuration screen where
you can add the selected wireless device to a profile and then enable it.
This displays the SSID of the wireless device.
indicates the wireless device is added to an activated profile and the NBG4615
is connecting to it.
This displays the MAC address of the wireless device.
This displays the strength of the wireless signal. The signal strength mainly depends
on the antenna output power and the distance between your NBG4615 and this
device.
This displays the channel number used by this wireless device.
This displays the data encryption method used by this wireless device.
This displays the authentication method used by this wireless device.
This displays the network type (In (Infrastructure) or Ad (Ad Hoc) of this wireless
device.
Click this button to search for available wireless devices within transmission range
and update this table.
Select a wireless device and click this button to add it to a profile.
NBG4615 User's Guide