Configuring Static Route For Routing To Another Network - ZyXEL Communications CellPipe 7130 RG User Manual

Chapter 2 Tutorials
The screen should display as follows. Click Add.
2
The port forwarding settings you configured should appear in the table. Click
3
Apply to have the CellPipe 7130 RG start forwarding port 666 traffic to the
computer with IP address 192.168.1.34.
Players on the Internet then can have access to Thomas' Doom server.
2.9 Configuring Static Route for Routing to
Another Network
In order to extend your Intranet and control traffic flowing directions, you may
connect a router to the CellPipe 7130 RG's LAN. The router may be used to
separate two department networks. This tutorial shows how to configure a static
routing rule for two network routings.
In the following figure, router R is connected to the CellPipe 7130 RG's LAN. R
connects to two networks, N1 (192.168.1.x/24) and N2 (192.168.10.x/24). If
you want to send traffic from computer A (in N1 network) to computer B (in N2
74
CellPipe 7130 RG User's Guide