Install and Remove the Seal From the Toner Cartridge
Install and Remove the Seal From the Toner Cartridge
1. Rotate the green handle on the toner cartridge clockwise as far
as you can. After you rotate it an eighth of a full rotation (45
degrees), you will not be able to rotate it any farther. Figure 25
shows the location of the toner cartridge and its handle.
NOTE: You will not be able to pull the toner cartridge out of the
Figure 25. Removing the Toner Cartridge
2. Pull the toner cartridge out of the developer unit.
3. Hold the new toner cartridge with the two pins directed
upwards. The plastic sealing strip will be near the top of the
cartridge. See Figure 26.
32
developer unit until you rotate the handle all the way.