I Call Channel Programming; I Lock Function; Basic Operation - Icom IC-M88 Instruction Manual

I Call channel programming

The call channel key is used to select channel 9 by default,
however, you can program your most often-used channels in
each channel group for quick recall.
q Push [CH/WX•
] for 1 sec.
U/I/C/L
several times to select the de-
sired channel group (USA, INT,
CAN) to be programmed.
w Push [16•
] for 1 sec. to select
9
the call channel of the selected
channel group.
• "CALL" and call channel number
appear.
e Push [16•
] again for 3 sec. (until
9
long beep changes to 2 short
beeps) to enter call channel pro-
gramming condition.
• Call channel number and channel
group to be programmed flashes.
r Push [Y]/[Z] to select the de-
sired channel.
t Push [16•
] to program the dis-
9
played channel as the call chan-
nel.
• The call channel number and
channel group stop flashing.

I Lock function

This function electronically locks all keys (except for [PTT],
[SQL• ] and [H/L• ]) to prevent accidental channel
MONI LOCK
changes and function access.
• Push [H/L• ] for 1 sec. to turn the lock function ON and
LOCK
OFF.
1

BASIC OPERATION

Appears while the
lock function is used.
11