Related Functions; Programming The Call Channel - Icom IC-2SA Instruction Manual

5-1 Call channel
A one-touch access call channel is provided for using your
most often used frequency. The call channel is separate
from memory channels.
(1) ACCESSING THE CALL CHANNEL
1) Push [C] to call up the call channel.
2) Push [C] again to return to the previous mode.
[EXAMPLE] Accessing the call channel.
RELATED FUNCTIONS
(2) PROGRAMMING THE CALL CHANNEL
1) Set the transceiver in VFO mode using [V/M].
2) Set the desired frequency (and Duplex, if desired) to
be programmed.
3) Push [C] to call up the call channel.
4) Push [FUNC], and then push and hold [V/M] to
program.
eThe displayed frequency is changed to the desired
frequency.
VFO or MEMORY MODE
[EXAMPLE] Writing 145.600 MHz into the call channel.
VFO MODE
CALL CHANNEL
CALL CHANNEL pus ny ond hold) CALL CHANNEL
Previous mode
[FUNC |
ar
5