Generac Power Systems PWRcell Reference Manual page 150

Appendix E State and Event Codes
Code Display Text
0x7010 input over
voltage
0x7300 arc fault lockout
0x7400 input reversed
146
Table F-3. PV Link States
Transient/ Severity Description
Steady
Steady Error PV Link input voltage was
measured high out of range.
Steady Error PV Link has gotten too many
arc fault events in the last 24
hours and is in a locked-out
state.
Steady Error PV Link detected a reverse
polarity on its input.
Diagnostics
- Check PV Panel Config.
- Check PV Wiring
- Measure Substring Voltage
- Disable/ Enable
- Check PV Wiring
- Disable/ Enable
- Check PV Wiring
Diagnostic Repair Manual