Summary of Contents for Generac Power Systems PWRcell X7600 Series
Page 1
Owner’s Manual Generac PWRcell™ Inverter WARNING Loss of life. This product is not intended to be used in a critical life support application. Failure to adhere to this warning could result in death or serious injury. (000209b) SAVE THIS MANUAL FOR FUTURE REFERENCE...
Page 2
Serial Number Locations WARNING CANCER AND REPRODUCTIVE HARM www.P65Warnings.ca.gov. (000393a)
Page 3
Section 1: Introduction and Safety Section 3: Operation Section 2: General Information Section 4: Maintenance...
Section 1: Introduction and Safety DANGER Indicates a hazardous situation which, if not avoided, will result in death or serious injury. (000001) WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury. (000002) WARNING Consult Manual.
Page 6
• DANGER Automatic start-up. Disconnect utility power and • render unit inoperable before working on unit. Failure to do so will result in death or serious injury. (000191) WARNING Risk of injury. Do not operate or service this machine if not fully alert. Fatigue can impair the ability to service this equipment and could result in death or •...
Page 7
DANGER DANGER Electrocution. Water contact with a power Electrocution. Initiate a system-wide safety shutdown source, if not avoided, will result in death and turn PWRcell Disconnect Switch OFF on all connected batteries before performing service. Failure or serious injury. to do so will result in death, serious injury, equipment (000104) and property damage.
Section 2: General Information Specifications are subject to change without notice. Refer to the product specification sheet for complete list.
Page 10
Figure 2-1 Table 1: Generac PWRcell Inverter Important Information Figure 2-2. Unit Dimensions Figure 2-1. Serial Number Location www.generac.com Figure 2-3 Figure 2-3. Generac PWRcell System Example...
Section 3: Operation Figure 3-1 Figure 3-3 REbus Inverter Internet Figure 3-3. Selecting Operational Modes (1 of 4) Shutdown (hold) Figure 3-4 Figure 3-1. Inverter Control Panel Figure 3-4 Figure 3-2 Figure 3-4. Selecting Operational Modes (2 of 4) Figure 3-2. Home Screen...
Page 16
Figure 3-5 DANGER Electrocution. Initiate a system-wide safety shutdown and turn PWRcell Disconnect Switch OFF on all connected batteries before performing service. Failure to do so will result in death, serious injury, equipment and property damage. (000600) DANGER Electrocution. Never enable any device during an installation or while wires are exposed.
Page 17
Figure 3-9 Figure 3-12 Figure 3-9. Enabling and Disabling Devices (2 of 3) Figure 3-10 Figure 3-12. Mod. Settings Menu (2 of 3) Figure 3-14 Figure 3-10. Enabling and Disabling Devices (3 of 3) Figure 3-13. Mod. Settings Menu (3 of 3) Table 3-4 Figure 3-11 Figure 3-14.
Page 18
PEEL AWAY REGISTER YOUR SYSTEM SERIAL NUMBER: XXXXX-XXXXX REGISTRATION CODE: RRRR-RRRR Go to to register https://register.generac.com/ or scan the code above. Figure 3-15. Serial Number and Registration Figure 3-15...
Section 4: Maintenance DANGER Electrocution. Activate safety shutdown before performing emergency or service work. Failure to Component Locations do so could result in death, serious injury, equipment or property damage (000628) DANGER Electrocution. Only an authorized technician should attempt to service this equipment. Failure to follow proper service requirements could result in death, serious injury, equipment or property damage (000629)