Generac Power Systems PWRcell Reference Manual page 10

Section 1 The PWRcell System
•
PWRcell inverter will stop sourcing power to
REbus, and immediately disable all communicating
power sources on REbus by sending a system-
wide system mode change signal.
NOTE: Successful signal transmission relies upon
proper configuration of PLM channels across REbus
devices (PV Links and Batteries).
•
Shutdown LED (Item B,
nate.
•
Inverter screen will display REbus DC bus voltage
and text indicting shutdown mode has been initi-
ated.
6
1-10) will illumi-
Figure
Diagnostic Repair Manual