Generac Power Systems PWRcell Reference Manual page 122

Section 13 PWRcell Battery BMU Replacement
Figure 13-28.
Figure 13-29.
Figure 13-30.
Figure 13-31.
118
1. Locate the PWRcell DC Disconnect that the
battery is landed on and turn to ON position.
013144
2. Locate PWRcell Battery master switch on top left
corner of frame. Turn to ON position.
013159
3. Locate Generac PWRcell Battery page on inverter
control panel.
4. Using the center button, open the device menu to
select 'Enable', then 'Confirm' to command the
battery on.
013160
The PWRcell Battery will automatically go to 'initializing'
within a few seconds.
013161
Diagnostic Repair Manual