Ups Transportation - Delta Modulon DPH Series User Manual

WARNING:
1. Do not use air conditioners or similar equipment to blow into the rear of
the UPS.
2. Do not hinder ventilation of the UPS.
• Keep the installation area clean. Please note that wiring routes must be hermetic
to prevent possible damage from rodents.
• Keep the installation area's temperature around 25 ° C (77 ° F) and humidity within
95%. The highest operating altitude is 1000 meters (3280 ft) above sea level.
• For safety concerns, we suggest that you:
1. Equip surroundings of the installation area with CO
extinguishers.
2. Install the UPS in an environment where fireproof materials are used to
construct the walls, floors and ceilings.
3. Install the UPS on a floor that is made of noncombustible materials.
• Do not allow unauthorized personnel to enter the installation area and assign
specified personnel to keep the UPS keys.
5.3

UPS Transportation

• At the bottom of the UPS, there are four casters to help you to move the UPS to a
designated area. Before moving the UPS, please turn the four leveling feet
counterclockwise to raise them off the ground. This protects the leveling feet from
damage while moving. Please arrange sufficient manpower (at least six people)
and equipment (e.g. forklift) to carefully move the UPS from its pallet to ground.
Please pay attention to movement of the casters to avoid accidents.
Caster
Leveling Foot
Figure 5-2: UPS Leveling Foot and Caster
or dry powder fire
2
45