Input Dry Contacts - Delta Modulon DPH Series User Manual

4.1.6

Input Dry Contacts

There are four sets of programmable input dry contacts. The input dry contacts allow
the UPS to receive external signals from peripheral devices and let the UPS response
accordingly. Please use the touch panel to set each dry contact as normally open (NO)
or normally closed (NC). Each input dry contact can be assigned a specific event. For
information about the eleven events, please refer to the table below. To learn how to
7.6.6 Dry Contact Setting
set up, please contact your local dealer and refer .
Figure 4-8: Input Dry Contacts & Schematic
35