Ups Transportation & Handling; Ups Installation - Delta Ultron HPH Series User Manual

6.3 UPS Transportation & Handling
There are four casters at the bottom of the UPS. Please pay attention to the movement of
the casters to avoid accidents when you remove the UPS from its pallet. The casters are
designed to move on level ground. Do not move the UPS on an uneven surface. This might
cause damage to the casters or tip the UPS which could damage the unit. If you need to
move the UPS over a long distance, please use appropriate equipment like a forklift. Do not
use the UPS casters to move the unit over a long distance.
6.4

UPS Installation

There are two installation methods. One is with the balance supports, and the other is without
the balance supports.
y
Installation without the Balance Supports
After moving the UPS to its final installation area, use the levelers to stabilize the UPS
cabinet on the ground.
y
Installation with the Balance Supports
If you want to reinstall the balance supports that have been removed from the UPS during
the unpacking process, please follow the following steps.
1 After you decide the installation area, follow the mounting hole diagram below to drill
holes on the installation ground.
(Figure 6-1: Stabilize the UPS with Levelers)
23
Chapter 6 Installation and Wiring