3Com Baseline 2928 PWR Plus User Manual page 473

Creating a Traffic Behavior
Configure a
traffic
Configuring
behavior
actions for a
behavior
Creating a Policy
Configure a
policy
Configuring Classifier-Behavior
Associations for the Policy
Apply the
Applying a Policy to a Port
policy
Configuring queue scheduling
Perform the task in Table 2-7
Table 2-7 Queue scheduling configuration task list
Configuring Queue Scheduling on a Port
Configuring line rate
Perform the task in Table 2-8
Table 2-8 Line rate configuration task list
Configuring Line Rate on a Port
Configuring the priority mapping tables
Perform the task in Table 2-9
Task
Configuring Traffic
Mirroring and
Traffic Redirecting
for a Traffic
Behavior
Configuring Other
Actions for a
Traffic Behavior
to configure queue scheduling.
Task
to configure line rate.
Task
to configure the priority mapping tables:
2-13
Required
Create a traffic behavior.
Use either approach
Configure various actions for the traffic
behavior.
Required
Create a policy.
Required
Associate the traffic behavior with the
class in the QoS policy.
A class can be associated with only one
traffic behavior in a QoS policy.
Therefore, associating a class that is
already associated with a traffic behavior
will overwrite the old association.
Required
Apply the QoS policy to a port.
Remarks
Optional
Configure the queue scheduling mode for a port.
Remarks
Required
Limit the rate of incoming packets or outgoing
packets of a physical port.
Remarks