3Com Baseline 2928 PWR Plus User Manual page 382

Enter 0.0.0.0 in the Destination Wildcard text box.
Click Add to finish the operation.
5) Configure the 802.1X feature
# Enable the 802.1X feature globally.
From the navigation tree, select Authentication > 802.1X to enter the 802.1X configuration page.
Figure 1-34 Global 802.1X globally
Perform the following configuration as shown in
Select the check box before Enable 802.1X.
Select the authentication method as CHAP.
Click Apply to finish the operation.
# Enable 802.1X on port GigabitEthernet 1/0/1.
In the Ports With 802.1X Enabled area, click Add.
Figure 1-35 802.1X configuration of GigabitEthernet 1/0/1
Figure 1-34.
1-27