# Configure the RADIUS authentication servers.
From the navigation tree, select Authentication > RADIUS. The RADIUS server configuration
page appears.
Figure 1-15 RADIUS authentication server configuration
Perform the following configurations as shown in
Select Authentication Server as the server type.
Enter the primary server IP address 10.1.1.1.
Select active as the primary server's status.
Enter the secondary server IP address 10.1.1.2.
Select active as the secondary server's status.
Click Apply.
# Configure the RADIUS accounting servers.
Figure 1-16 RADIUS accounting server configuration
Perform the following configurations as shown in
Select Accounting Server as the server type.
Enter the primary server IP address 10.1.1.2.
Select active as the primary server's status.
Figure
1-15.
Figure
1-16:
1-16