Acl Assignment Configuration Example - 3Com Baseline 2928 PWR Plus User Manual

Figure 1-22 Configure the AAA accounting method for the ISP domain
Select the domain name test.
Select the Default Accounting checkbox and then select RADIUS as the accounting mode.
Select system from the Name drop-down list to use it as the accounting scheme.
Click Apply. A configuration progress dialog box appears.
After the configuration process is complete, click Close.

ACL Assignment Configuration Example

Network requirements
As shown in Figure
together to authenticate the host that is to access the Internet. An FTP server is on the Internet, and its
IP address is 10.0.0.1.
Configure the authentication server to assign ACL 3000.
Enable 802.1X for port GigabitEthernet 1/0/1 and configure ACL 3000 on the switch.
After a user passes authentication, the authentication server assigns ACL 3000. At this time, ACL 3000
takes effect on GigabitEthernet 1/0/1, allowing the host to access the Internet but not the FTP server.
Figure 1-23 Network diagram for ACL assignment
192.168.1.1/24
Host
192.168.1.10
1-23, the switch and the RADIUS authentication servers (iMC servers) work
Vlan-int2
GE1/0/1
Switch
Authentication servers
(RADIUS server cluster)
10.1.1.1
10.1.1.2
Internet
FTP server
10.0.0.1
1-20