Configuring Priority Mapping Tables - 3Com Baseline 2928 PWR Plus User Manual

Figure 2-20 The page for configuring line rate on a port
Table 2-20 describes the configuration items of configuring line rate on a port.
Table 2-20 Configuration items of configuring line rate on a port
Item
Please select an interface type
Rate Limit
Direction
CIR
Please select port(s)
Return to Line rate configuration task

Configuring Priority Mapping Tables

Select QoS > Priority Mapping from the navigation tree to enter the page shown in
Select the types of interfaces to be configured with line rate.
The interface types available for selection depend on your device
model.
Enable or disable line rate on the specified port.
Select a direction in which the line rate is to be applied.
Inbound: Limits the rate of packets received on the specified
port.
Outbound: Limits the rate of packets sent by the specified
port.
Both : Limits the rate of packets received on and sent by the
specified port.
Set the committed information rate (CIR), the average traffic rate.
Specify the ports to be configured with line rate
Click the ports to be configured with line rate in the port list. You
can select one or more ports.
list.
2-24
Description
Figure 2-21.