3Com Baseline 2928 PWR Plus User Manual page 169

Figure 1-6 The Modify VLAN tab
Table 1-5 describes the configuration items of modifying a VLAN.
Table 1-5 Configuration items of modifying a VLAN
Item
Please select a
VLAN to modify
Modify Description
Untagged
Select
Tagged
memb
ership
type
Not A
Member
Select ports to be
modified and
assigned to this
VLAN
Return to VLAN configuration task list (approach
Select the VLAN to be modified.
Select a VLAN in the drop-down list. The VLANs available for selection are
created first and then selected on the page for selecting VLANs.
Modify the description string of the selected VLAN.
By default, the description string of a VLAN is its VLAN ID, such as VLAN
0001.
Set the member type of the port to be modified in the VLAN
Select the Untagged, Tagged, or Not A Member radio button:
Untagged: Indicates that the port sends the traffic of the VLAN with the
VLAN tag removed.
Untagged: Indicates that the port sends the traffic of the VLAN without
removing the VLAN tag.
Not a Member: Removes the port from the VLAN.
Select the ports to be modified in the selected VLAN.
Click the ports to be modified on the chassis front panel. You can select one
or more ports. If aggregation groups are configured on the device, the page
displays a list of aggregated ports below the chassis front panel. You can
select ports from this list.
1-7
Description
I).