Configuring Queue Scheduling On A Port - 3Com Baseline 2928 PWR Plus User Manual

Figure 2-18 The page for applying a policy to a port
Table 2-18 describes the configuration items of applying a policy to a port.
Table 2-18 Configuration items of applying a policy to a port
Item
Please select a policy
Direction
Please select port(s)
Return to QoS policy configuration task

Configuring Queue Scheduling on a Port

Select QoS > Queue from the navigation tree and click Setup to enter the queue scheduling
configuration page, as shown in
Figure 2-19 The page for configuring queue scheduling
Select a created policy in the drop-down list.
Set the direction in which the policy is to be applied.
Inbound: Applies the policy to the incoming packets of the
specified ports.
Click to select ports to which the QoS policy is to be applied on the
chassis front panel.
list.
Figure 2-19.
2-22
Description