3Com Baseline 2928 PWR Plus User Manual page 370

Figure 1-13 Global 802.1X configuration
Perform the following configurations as shown in
Select the check box before Enable 802.1X.
Select the authentication method as CHAP.
Click Apply to finish the operation.
# Enable and configure 802.1X on port GigabitEthernet 1/0/1.
In the Ports With 802.1X Enabled area, click Add.
Figure 1-14 802.1X configuration of GigabitEthernet 1/0/1
Perform the following configurations as shown in
Select port GigabitEthernet1/0/1 from the port drop-down list.
Select the checkbox before Enable Re-Authentication.
Click Apply to finish the operation.
3) Configure the RADIUS scheme system
Figure 1-13.
Figure 1-14.
1-15