3Com Baseline 2928 PWR Plus User Manual page 416

Figure 1-2 Local user configuration page
Table 1-1 describes the configuration items for configuring a local user.
Table 1-1 Local user configuration items
Item
Username Specify a name for the local user.
Password
Specify and confirm the password of the local user. The settings of these two
fields must be the same.
Confirm
Select a user group for the local user.
Group
For information about user group configuration, refer for
Group.
Select the service types for the local user to use, including FTP, Telnet, LAN
access (accessing through the Ethernet, such as 802.1x users), and SSH.
Service-type
If you do not specify any service type for a local user who uses local
authentication, the user cannot pass authentication and therefore cannot log
in.
Specify an expiration time for the local user, in the format
HH:MM:SS-YYYY/MM/DD.
Expire-time
When authenticating a local user with the expiration time argument configured,
the access device checks whether the expiration time has elapsed. If not, the
device permits the user to log in.
Description
1-2
Configuring a User