Guidelines - 3Com Baseline 2928 PWR Plus User Manual

Figure 1-15 Configure MSTP globally (on Switch D)
Select Enable in the Enable STP Globally drop-down list.
Select MSTP in the Mode drop-down list.
Click Apply.

Guidelines

Follow these guidelines when configuring MSTP:
Two devices belong to the same MST region only if they are interconnected through physical links,
and share the same region name, the same MSTP revision level, and the same VLAN-to-MSTI
mappings.
If two or more devices have been designated to be root bridges of the same spanning tree instance,
MSTP will select the device with the lowest MAC address as the root bridge.
If the device is not enabled with BPDU guard, when a boundary port receives a BPDU from another
port, it transits into a non-boundary port. To restore its port role as a boundary port, you need to
restart the port.
1-28