Energy Saving Configuration; Configuring Energy Saving On A Port - 3Com Baseline 2928 PWR Plus User Manual

1

Energy Saving Configuration

Overview
Energy saving allows you to configure a port to work at the lowest transmission speed, disable PoE, or
go down during a specified time range on certain days of a week. The port resumes working normally
when the effective time period ends.

Configuring Energy Saving on a Port

Select Device > Energy Saving from the navigation tree to enter the energy saving configuration page,
as shown in Figure
Figure 1-1 Energy saving configuration page
Table 1-1 describes the configuration items for configuring energy saving on a port.
Table 1-1 Configuration items for configuring energy saving on a port
Item
Time Range
Sun through Sat
PoE Disabled
1-1. You can select a port and configure an energy saving policy for the port.
Set the time period when the port is in the state of energy saving.
Up to five energy saving policies with different time ranges can be
configured on a port.
Specify the start time and end time in units of 5 minutes, such as 08:05 to
10:15. Otherwise, the start time will be postponed and the end time will be
brought forward so that they meet the requirements. For example, if you
set the time range to 08:08 to 10:12, however, the effective time range is
actually 08:10 to 10:10.
Disable PoE on the port.
Description
1-1