3Com Baseline 2928 PWR Plus User Manual page 156

Click the Group tab and then click Add to enter the page as shown in
Figure 1-22 Create an SNMP group
Type group1 in the text box of Group Name.
Select view1 from the Read View drop-down box.
Select view1 from the Write View drop-down box.
Click Apply.
# Configure an SNMP user
Click the User tab and then click Add to enter the page as shown in
Figure 1-23 Create an SNMP user
Type user1 in the text box of User Name.
Select group1 from the Group Name drop-down box.
Click Apply.
# Enable the agent to send SNMP traps.
1-15
Figure 1-22.
Figure 1-23.