Creating An Ipv4 Acl; Configuring A Rule For A Basic Ipv4 Acl - 3Com Baseline 2928 PWR Plus User Manual

Return to IPv4 ACL configuration task

Creating an IPv4 ACL

Select QoS > ACL IPv4 from the navigation tree and then select the Create tab to enter the IPv4 ACL
configuration page, as shown in
Figure 1-2 The page for creating an IPv4 ACL
Table 1-5 describes the configuration items for creating an IPv4 ACL.
Table 1-5 IPv4 ACL configuration items
Item
ACL Number
Match Order
Return to IPv4 ACL configuration task

Configuring a Rule for a Basic IPv4 ACL

Select QoS > ACL IPv4 from the navigation tree and then select the Basic Setup tab to enter the rule
configuration page for a basic IPv4 ACL, as shown in
list.
Figure 1-2.
Set the number of the IPv4 ACL.
Set the match order of the ACL. Available values are:
Config: Packets are compared against ACL rules in the order that the
rules are configured.
Auto: Packets are compared against ACL rules in the depth-first
match order.
list.
1-5
Description
Figure 1-3.