Displaying Information Of Lacp-Enabled Ports - 3Com Baseline 2928 PWR Plus User Manual

Figure 1-3 The Setup tab
After finishing each configuration item, click the right Apply button to submit the configuration.
Table 1-6 describes the configuration items.
Table 1-6 LACP priority configuration items
Select LACP enabled port(s) parameters
Select port(s) to apply Port Priority
System Priority
Return to Dynamic aggregation group configuration task

Displaying Information of LACP-Enabled Ports

Select Network > LACP from the navigation tree. The Summary tab is displayed by default, as shown
in Figure 1-4.
Item Description
Set a port LACP priority.
Select the ports where the port LACP priority you set
will apply on the chassis front panel.
(You can set LACP priority not only on LACP-enabled
ports but also on LACP-disabled ports.)
Set the LACP priority of the local system
list.
1-8