3Com Baseline 2928 PWR Plus User Manual page 334

Item
Enable SFTP
SFTP
service
Enable HTTP
service
Port Number
HTTP
ACL
Enable HTTPS
service
Port Number
HTTPS
ACL
PKI Domain
Specifies whether to enable the SFTP service.
The SFTP service is disabled by default.
When you enable the SFTP service, the SSH service must be
enabled.
Specifies whether to enable the HTTP service.
The HTTP service is enabled by default.
Sets the port number for HTTP service.
You can view this configuration item by clicking the expanding
button in front of HTTP.
When you modify a port, ensure that the port is not used by other
service.
Associates the HTTP service with an ACL. Only the clients that pass
the ACL filtering are permitted to use the HTTP service.
You can view this configuration item by clicking the expanding
button in front of HTTP.
Specifies whether to enable the HTTPS service.
The HTTPS service is disabled by default.
Sets the port number for HTTPS service.
You can view this configuration item by clicking the expanding
button in front of HTTPS.
When you modify a port, ensure that the port is not used by other
service.
Associates the HTTPS service with an ACL. Only the clients that
pass the ACL filtering are permitted to use the HTTPS service.
You can view this configuration item by clicking the expanding
button in front of HTTPS.
Sets the PKI domain for the HTTPS service.
You can configure the available PKI domains by selecting
Authentication > PKI from the navigation tree at the left side of the
interface. For more information, refer to PKI Configuration of this
manual.
1-3
Description