Device Reboot - 3Com Baseline 2928 PWR Plus User Manual

Table 1-1 Software upgrade configuration items
Item
File
Filename
File Type
If a file with same
name already exists,
overwrite it without
prompt.
Reboot after the
upgrading finished.

Device Reboot

Before rebooting the device, save the configuration; otherwise, all unsaved configuration will be lost
after device reboot. After the device reboots, you need to re-log in to the Web interface.
Select Device > Device Maintenance from the navigation tree, click the Reboot tab to enter the device
reboot configuration page, as shown in
Figure 1-2 Device reboot page
Click Apply to reboot the device. You can choose to check whether the current configuration has been
saved to the configuration file to be used at the next startup.
Specifies the filename of the local application file, which must be with an
extension .bin.
Specifies a filename for the file to be saved on the device. The filename
must have an extension, which must be the same as that of the source
application file.
Specifies the type of the boot file for the next boot:
Main
Backup
Specifies whether to overwrite the file with the same name.
If you do not select the option, when a file with the same name exists, a
dialog box appears, telling you that the file already exists and you can not
continue the upgrade.
Specifies whether to reboot the device to make the upgraded software take
effect after the application file is uploaded.
Figure 1-2.
1-2
Description