3Com Baseline 2928 PWR Plus User Manual page 127

Configuring an Event Entry
Select Device > RMON from the navigation tree and click the Event tab to enter the page, as shown in
Figure 1-5. Click Add to enter the page for adding an event entry, as shown in
Figure 1-5 Event entry
Figure 1-6 Add an event entry
Table 1-7 describes the items for configuring an event entry.
Table 1-7 Event entry configuration items
Item
Description
Owner
Event Type
Return to RMON alarm configuration task
Configuring an Alarm Entry
Select Device > RMON from the navigation tree and click the Alarm tab to enter the page, as shown in
Figure 1-7. Click Add to enter the page for adding an alarm entry, as shown in
Set the description for the event.
Set the owner of the entry.
Set the actions that the system will take when the event is triggered:
Log: The system will log the event
Trap: The system will send a trap in the community name of null.
If both Log and Trap are selected, the system will log the event and send a
trap; If none of them is selected, the system will take no action
list.
1-7
Figure
Description
Figure
1-6.
1-8.