3Com Baseline 2928 PWR Plus User Manual page 417

Item
Level
VLAN
ACL
User-profile
Configuring a User Group
Select Authentication > Users from the navigation tree, and then select the User Group tab to display
the existing user groups, as shown in
page, as shown in
Figure 1-3 User group list
Figure 1-4 User group configuration page
Table 1-2 describes the configuration items for configuring a user group.
Select an authorization level for the local user,
which can be Visitor, Monitor, Configure, or
Management, in ascending order of priority.
Specify the VLAN to be authorized to the local
user after the user passes authentication.
Specify the ACL to be used by the access device
to restrict the access of the local user after the
user passes authentication.
Specify the user profile for the local user.
Currently, switch 2900 series do not support
user-profile configuration.
Figure
Figure 1-4.
Description
1-3. Then, click Add to enter the user group configuration
1-3
Every authorization
attribute has its definite
application environments
and purposes. Therefore,
when configuring
authorization attributes
for a local user, determine
what attributes are
needed first.