VLAN-interface 2 is 10.1.1.1/24. VLAN-interface 2 is connected to the DHCP server whose IP address
is 10.1.1.1/24.
The switch forwards messages between DHCP clients and the DHCP server.
Figure 2-8 Network diagram for DHCP relay agent configuration
Configuration procedure
1)
Specify IP addresses for interfaces (omitted)
2)
Configure the DHCP relay agent
# Enable DHCP.
Select Network > DHCP from the navigation tree to enter the default DHCP Relay page. Perform
the following operations, as shown in
Figure
2-9.
2-7