3Com Baseline 2928 PWR Plus User Manual page 150

Figure 1-11 SNMP group
Figure 1-12 Create an SNMP group
Table 1-6 describes the configuration items for creating an SNMP group.
Table 1-6 Configuration items for creating an SNMP group
Item
Group Name
Security Level
Read View
Write View
Notify View
Set the SNMP group name.
Select the security level for the SNMP group. The available security
levels are:
NoAuth/NoPriv: No authentication no privacy.
Auth/NoPriv: Authentication without privacy.
Auth/Priv: Authentication and privacy.
For an existing SNMP group, its security level cannot be modified.
Select the read view of the SNMP group.
Select the write view of the SNMP group.
If no write view is configured, the NMS cannot perform the write
operations to all MIB objects on the device.
Select the notify view of the SNMP group, that is, the view that can
send trap messages.
If no notify view is configured, the agent does not send traps to the
NMS.
1-9
Description