3Com Baseline 2928 PWR Plus User Manual page 372

Enter the secondary server IP address 10.1.1.1.
Select active as the secondary server's status.
Click Apply to finish the operation.
# Configure the scheme used for communication between the device and the RADIUS servers.
Select the RADIUS Setup tab to enter the RADIUS parameter configuration page. Perform the
following configurations as shown in
Figure 1-17 RADIUS parameter configuration
Select extended as the server type.
Select the Authentication Server Shared Key checkbox, and enter name in the textbox.
Enter name again in the Confirm Authentication Shared Key textbox.
Select the Accounting Server Shared Key checkbox, and enter money in the textbox.
Enter money again in the Confirm Accounting Shared Key textbox.
Enter 5 in the Timeout Interval textbox
Enter 5 in the Timeout Retransmission Times textbox.
Enter 15 in the Realtime-Accounting Interval textbox.
Click Apply to finish the operation.
4) Configure AAA
# Create an ISP domain.
Figure 1-17.
1-17