3Com Baseline 2928 PWR Plus User Manual page 405

Baseline switch 2900 family
Hide thumbs Also See for Baseline 2928 PWR Plus:
Table of Contents

Advertisement

Table 1-4 RADIUS server configuration
Item
Server Type
Primary Server IP
Primary Server UDP Port
Primary Server Status
Secondary Server IP
Secondary Server UDP
Port
Secondary Server Status
Return to
RADIUS configuration task
Configuring RADIUS Parameters
From the navigation tree, select Authentication > RADIUS and then select the RADIUS Setup tab to
enter the RADIUS parameter configuration page, as shown in
Specify the type of the server to be configured, which can be
Authentication Server and Accounting Sever.
Specify the IP address of the primary server.
If no primary server is specified, the text box displays 0.0.0.0.
To remove the previously configured primary server, enter 0.0.0.0 in the
text box.
The specified IP address of the primary server cannot be the same as
that of the secondary server.
Specify the UDP port of the primary server.
If the IP address of the primary server is not specified or the specified IP
address is to be removed, the port number is 1812 for authentication or
1813 for accounting.
Set the status of the primary server, including:
active: The server is working normally.
blocked: The server is down.
If the IP address of the primary server is not specified or the specified IP
address is to be removed, the status is blocked.
Specify the IP address of the secondary server.
If no secondary server is specified, the text box displays 0.0.0.0.
To remove the previously configured secondary server, enter 0.0.0.0 in
the text box.
The specified IP address of the secondary server cannot be the same as
that of the primary server.
Specify the UDP port of the secondary server.
If the IP address of the secondary server is not specified or the specified
IP address is to be removed, the port number is 1812 for authentication
or 1813 for accounting.
Status of the secondary server, including:
active: The server is working normally.
blocked: The server is down.
If the IP address of the secondary server is not specified or the specified
IP address is to be removed, the status is blocked.
list.
1-8
Description
Figure
1-6.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents